Using a hole cutter for the circular cuts and a multi-tool for the straight cuts, we cut along the markings so we could easily reattach our fixtures and vents over the shiplap ceiling.
Step 4. Sew things up with caulk and spackle.
Now that your shiplap planks are in place, it’s time to caulk and spackle.
First, apply caulk in a small bead, along the edges of the room. Then, smooth with your finger to create a seal between the walls and ceiling planks.
Keep in mind that paint touch ups along the wall may be necessary after caulking. For this project, we planned on painting the entire room, so the messy caulk smears weren’t a major concern for us.
If you wanted to make sure your lines were clean, you could apply painter’s tape to the wall first and then remove the tape after you’re done caulking.
Spackle the nail holes using a putty knife, sand to smooth, and then you are ready to paint.
5. Complete the project
For all of our ceilings, we use Behr’s Flat White ceiling paint, but you can use any color of your choice. Roll on the paint in the directions of the planks.
If you find the paint is running between the shiplap planks, run a screwdriver along edges between the planks while the paint is still wet.
As you are painting, be mindful of “bumping” the walls with your roller. For this reason, it’s a good idea to “cut” into the ceiling with a paint brush, painting about an inch or two into the ceiling planks and away from the walls. We use an angeled paint brush for this.
After the ceiling is painted and dried, replace your light fixtures and vent covers, and enjoy a beautiful and bright new look!
Updating aging ceilings doesn’t have to break the bank! Installing shiplap over textured ceilings is a great way to skip scraping and will give your home an updated look that you can be proud of.