Then it was off to Home Depot to pick up one each of the following:
1x4x8 (cut in half)
2x4x8 (cut in half)
1x6x8 tongue & groove plank.
Then I sandwiched the door between boards on either side, with the 1x4s in the front and 2x4s in the back and secured them with 4″ wood screws (make sure to drill your pilot holes first). This created “legs” and then I attached the tongue & groove plank to the top for a shelf.
Next came the painting. I applied a light coat of watered down antique white latex paint over the whole thing (covering the window panes with paper and tape to aid in clean up) and then once dried, I applied a little magic that I learned restoring furniture.
To Keep Reading Please Head On Over To Next Page Or Open button (>) and don’t forget to SHARE with your Facebook friends