Step 2-3 I painted two additional coats of Retique it Chalk Paint in Old Linen and added Prima MouldFor steps 2-3 I painted two additional coats of Retique it Chalk Paint in Old Linen and made decorative moulds using Redesign with Prima Moulds and Hot Glue.
Step 3 I used Redesign with Prima Moulds to add the decorative designsFor this step I used hot glue and Redesign with Prima Moulds to create these decorative pieces. Once the glue has cooled, these pop right out of the mould. To apply the moulds I use E6000 glue.
Step 4 I painted over all of the moulds with Retique it Chalk Paint in Old LinenFor step 4 I painted over all of the decorative moulds with Retique it Chalk Paint in Old Linen
Step 5 I lightly distressed the edges using 100 Grit sand paperI used 100 grit sand paper to lightly distress the edges and corners to give this piece an old world look.
Step 6: I used Redesign with Prima wax to highlight the detailed areas of this pieceTo make the decorative moulds as well as the details on this piece pop, I used Redesign with Prima wax in black and bronze to accent these areas.
Step 7: Sealed with Clear Sealing WaxTo finish off this piece I applied two coats of clear sealing wax.
Finished and Ready for InstallationThe vanity is finished and ready to be installed! Hope you enjoyed this redesign. To see other pieces I have redesigned check out my facebook page at Redesign by Renee Co or my website www.redesignbyreneeco.com I am a Retique it and Redesign with Prima Retailer. You can order Retique it Products by using my affiliate link: retique.com/?srrf=j4cBN